HDD Printed circuit board (PCB) with board number 100466824 is usually used on these Seagate hard disk drives: ST31000340AS, 9QJ, KRATSG, PN 9BX158-301, FW SD01, Seagate 1TB SATA 3.5 Hard Drive; ST3750630AS, 9QK, KRATSG, PN 9BX146-035, FW DE13, Seagate 750GB SATA 3.5 Hard Drive; ST31000340NS, 9QJ, KRATSG, PN 9CA158-056, FW XR36, Dell 1TB SATA 3.5…
Swap 100466824 Seagate Barracuda 7200.11 PCB(Printed Circuit Boards) to recover your data from damaged HDD due to PCB failure. 100466824 is the board number on this PCB. If your HDD’s PCB has problems, the drive usually cannot boot up or there may be an inaccurate display in the BIOS of the hard drive’s information. Also power may not get to the hard drive and as a result it will not spin up.
Seagate 100466824 Barracuda 7200.11 PCB Board Details:
Board Number: 100466824
Main Controller IC: TTB5501D
Motor Combo IC: 100439116
Series: Seagate Barracuda 7200.11
Note: Hard drive failures are NOT always caused by circuit board failure.
Swap Seagate 100466824 Barracuda 11 PCB will not solve the problem below:
1. The hard drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer;
2. The hard drive will power up normally and be recognized correctly but will report a size of 0 bytes;
3. The hard drive will power up but report SMART errors on boot;
100466824 Seagate Barracuda 7200.11 PCB Photos:
Order Online: Seagate 100466824 Barracuda 7200.11 PCB
