2024-04-25

100535537

Seagate Board 100535537

DATARECOVERYUNION.COM02 mins

I am looking for Segate board # 100535537 and the main chip is b5502c30. I see you have the board but the description says it contains a different chip b5502c20. Do you have the c30?

We also have this PCB with Main Controller IC of b5502c30. When you order, please note you need the b5502c30 one.

In fact, for this PCB swap, just need the donor PCB has the same board number 100535537 as yours. Then you need move your original PCB’s BIOS to the replacement PCB. The 8pins (4 pins on each sides) with 25P05VP、25P10VP、25F512、25F1024、25F1024AN、SST25VF512、SST25VF010, etc. are the BIOS.

Different Main Controller IC PCB can be used as same.

I received my board today, transfered the bios, but the drive is not powering up, is there anything else that needs to be transfered? The board I received does not have all components matching up, only 2 of the 3 main ic’s

In fact, for this PCB swap, just need the donor PCB has the same board number as yours. Also just need swap BIOS.

Please add more tin to solder the BIOS firmer and confirm you soldered the BIOS in right direction.

Thanks! I did have it in the right direction, just not enough solder.

Read More

100535537 Seagate Barracuda 7200.12 PCB

DATARECOVERYUNION.COM03 mins

Swap Seagate Barracuda 7200.12 PCB board 100535537 to recover your data from damaged HDD due to PCB failure. 100535537 is the board number on this PCB. If your HDD’s PCB has problems, the drive usually cannot boot up or there may be an inaccurate display in the BIOS of the hard drive’s information. Also power may not get to the hard drive and as a result it will not spin up.

There are two types of this Seagate 100535537 PCB:

1. Seagate 100535537 Barracuda 7200.12 PCB Circuit Board Details:

Board Number: 100535537
Main Controller IC: V60131
HDD Motor Combo IC: SH6968B

2. Seagate 100535537 B5502C20 Barracuda 7200.12 PCB Circuit Board Details:

Board Number: 100535537
Main Controller IC: B5502C20
HDD Motor Combo IC: SH6968B2

Note: Hard drive failures are NOT always caused by circuit board failure.

Possibilities of Seagate circuit board failures:

  1. Hard disk doesn’t spin up. Either no sound or a short, quiet tickling sound can be heard.
  2. Hard disk does not spin up. Buzzing sound can be heard.
  3. Hard drive spins up fine, but is not recognized in device manager or in BIOS. Hard drive recognized with default manufacturer value (like 0GB capacity, wrong SN or Model).
  4. There is a burning smell can be sensed coming from a hard drive or pcb circuit board.
  5. You can see a burned component on the circuit board.
  6. Hard drive makes a clicking sound.
  7. Extremely slow reading.
  8. Hard drive, after some time disappears from Device Manager and from the system. May also be running very hot.

Seagate 100535537 (V60131)  Barracuda 7200.12 PCB Photo:

Seagate-100535537-PCB

Seagate 100535537 (B5502C20)  Barracuda 7200.12 PCB Photo:

Seagate-100535537-PCB

Buy this Seagate PCB board online: PCB 100535537 (V60131)
Buy this Seagate PCB board online: PCB 100535537 (B5502C20)

Read More