Home > Hard Disk PCB Boards > WD 2060-701590-000 PCB

WD 2060-701590-000 PCB

May 9th, 2011

Swap 2060-701590-000 WD PCB(Printed Circuit Boards) to recover your data from damaged HDD due to PCB failure. 2060-701590-000 is the board number on this PCB. If your HDD’s PCB has problems, the drive usually cannot boot up or there may be an inaccurate display in the BIOS of the hard drive’s information. Also power may not get to the hard drive and as a result it will not spin up.

2060-701590-000 WD PCB Board Details:

Board Number: 2060-701590-000
Main Controller IC: 88i8846-TFJ2
HDD Motor Combo IC: L7251 3.1
Manufacturer: Western Digital

Note: Hard drive failures are NOT always caused by circuit board failure.

Swap 2060-701590-000 WD PCB will not solve the problem below:

1. The hard drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer;
2. The hard drive will power up normally and be recognized correctly but will report a size of 0 bytes;
3. The hard drive will power up but report SMART errors on boot;

WD 2060-701590-000 PCB Photos:

WD 2060-701590-000 PCB

Order Online: Western Digital 2060-701590-000 PCB

Comments are closed.