We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of 100797092 PCB
- Seagate hardrive
Solutions of 100797092 PCB (Donor PCB)
- Seagate PCB 100797092
- ST4000DM000 Seagate PCB 100797092
- ST4000DM005 Seagate PCB 100797092
- ST4000VN000 Seagate PCB 100797092
- ST4000VX000 Seagate PCB 100797092
- ST4000DM005 P/N: 2DP166-300 F/W: 0001 WU WDH Seagate BarraCuda 4TB
- ST4000DM000 P/N: 2AE166-568 F/W: 0001 WU WDH Seagate 4TB
- ST4000DM005 P/N: 2DP166-300 F/W: 0001 WU WDH Seagate 4TB
- ST4000DM000 P/N: 2AE166-568 F/W: 0001 TK ZDH Seagate 4TB
- PCB ST4000DM005 100797092 REV A P/N: 2DP166-300 F/W: 0001 WU Seagate
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.