We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of G3626A PCB
- x300 toshiba firmware identify and swap
Solutions of G3626A PCB (Donor PCB)
- HDWE140 Toshiba PCB G3626A
- HDWE140UZSVA Toshiba PCB G3626A
- HDWE150UZSVA Toshiba PCB G3626A
- MD04ACA300 Toshiba PCB G3626A
- MD04ACA400 Toshiba PCB G3626A
- X300 HDWE140 P/N: HDETR11ZPA51 F/W: FP1R Toshiba 4TB
- X300 HDWE150 MD04ACA500 P/N: HDETR10GCA51 F/W: FP2A Toshiba 5TB
- MD04ACA400 Toshiba 4TB P/N: HDETR11GPA51 F/W: FP1U Desktop Hard Drive
- X300 HDWE150UZSVA P/N: HDETR10GCA51 F/W: FP2A Toshiba 5TB
- X300 HDWE150 P/N: HDETR10ZPA51 F/W: FP1R Toshiba 5TB
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.