Case:The customer’s mobile hard disk is a hard disk for the unit’s leader. The problems in it do not understand the specific situation, but the leader said that the hard disk is not available now.I hope the data in the hard disk is exported. After receiving the hard disk, the customer will insert the hard […]

Case:The customer’s mobile hard disk has been used for two or three years. It has been used normally. There has never been a problem. It has been found that the reading market has become slower some time ago, but it can still be used normally.The mobile hard disk behind the computer does not recognize the

Case:When the mobile hard disk is inserted on the computer, the crash will appear, and it will be fine again.I checked it with the software and found that there were many bad channels.There are some important drawings in it to recover. Solution:It was tested by our company’s engineer and found that there were more bad

Case:Seagate’s 320GB hard disk data is successfully resumed. The data recovery center has successfully restored important customer data through re -compiling firmware information to recover economic losses for customers.The data recovery center received a call from the customer for help. The customer had a Seagate 320GB hard disk that could not be read normally. Many

Case:The customer’s Western Digital 500G mobile hard disk suddenly found that it was unable to recognize. Solution:The engineer was damaged by testing and judging.After the opening of the dust -free room, the magnetic head was replaced, and the data was still unable to restore the data.For this hard disk, our company’s engineer has determined that

Case:Ms. Yang had a hard disk, and she did not recognize the disk when she received it on the computer. She also issued a guide. Solution:Ms. Yang also took the hard disk to resume the company. After the testing of the engineer, she determined that the magnetic head was broken. She carefully discussed with Ms.

Case:Samsung mobile hard disk customer fell Solution:After power -on, the hard disk is turned and there is abnormal noise. After the engineer is tested, the magnetic head problem is determined.Find the same model and firmware hard disk as the same model as the client’s fault disk.At the 100 -level dust -free workshop, the magnetic head

Case:Seagate 1TB mobile hard disk USB3.0, the mobile hard disk fell from 0.2 meters high during use, resulting in inability to recognize. Solution:The engineer initially detected the motor card to die, and there was a slight click. It was a obvious failure caused by the vibration during the use of the hard disk.The motor and

Case:The customer’s hard disk is not soaked in water. After drying, the customer tries to connect the computer to try to read the data, but without any response, the customer wants to restore all the data in the mobile hard disk. Solution:The faulty device is the 250G mobile hard disk of the brigade. Because the