I need to frequently change the DNS server address, and for now I do it by opening ‘network and sharing center’ – ‘local area connection’ – properties – ipv4 – and then type the DNS numbers. Is there a faster way to do it? Can I do it with a batch file or a powershell…
We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB. Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same! FAQs of 100797092 PCB…
A screen of mine burnt out, and was replaced with a screen of lower resolution. It works in safe mode as that is in 800×600 resolution, but when I try to boot to normal mode, it fails. Is there a way to change the resolution for normal mode in safe mode? Solution: Once you’re in…
My machine has a SSD (fairly small) and a Hard disk (large). I want to have windows and a couple of programs on the SSD but I want to have the documents folders (such as my documents and my downloads) on the HD. I also want the default install directory pointing at the larger HD….
I’m connected to a LAN with the aid of DHCP. Now and then, I need to reach a laptop someone brings to the office that’s not configured to use DHCP. So far I need to do the following: Connect laptop to a network port Write down laptop’s IP address and mask Change laptop’s network settings…
We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB. Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same! FAQs of 100788341 PCB…
I just got a new laptop without any OS (it had FreeDOS, but not anymore). When I go to Windows Installer and try to create a new partition from un-allocated space, I don’t get any Error message but the installer is unable to create the partition. At the bottom of the installer window, there’s a…
I need to create a bootable CD from an ISO. Is there free software available? I am using Windows 7. Solution: You can use the free ImgBurn to do that. Here is a walkthrough explaining how to create bootable CDs with ImgBurn.
We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB. Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same! FAQs of 100774000 PCB…
In the last 18 hours my Windows 7 Pro 64-bit machine has rebooted in response to the Windows Update applying patches. Now I find when I try to start the VirtualBox Manager (not the actual VM’s which the manager manages, I don’t get that far) I get the message “.GLOBALROOTSystemRootSystem32.dll is either not designed to…
