We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of 040125100 PCB
- finding a PCB for Maxtor DiamondMax 10
Solutions of 040125100 PCB (Donor PCB)
- 6L080L0 Maxtor PCB 040125100
- 6L080P0 Maxtor PCB 040125100
- 6L100P0 Maxtor PCB 040125100
- 6L120P0 Maxtor PCB 040125100
- 6L160P0 Maxtor PCB 040125100
- 6L100P0, BAJ41G20, KGGA, BEAGLE E5-D4 040125100, Maxtor IDE 3.5 PCB
- 6L160P0, BAJ41G10, NMGA, BEAGLE E5-D4 040125100, Maxtor IDE 3.5 PCB
- 7L250R0, BAJ41G20, NMBA, BEAGLE E5-D4 040125100, Maxtor IDE 3.5 PCB
- 6L200P0, BAJ41G20, KMGA, BEAGLE E5-D4 040125100, Maxtor IDE 3.5 PCB
- 6L100P, BAJ41G20, KMGA, BEAGLE E5-D4 040125100, Maxtor IDE 3.5 PCB
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.