We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs ofBF41-00206B PCB
- HD103UJ PCB swap
- Replacing PCB diode question – Samsung HD154UI
- Samsung HD103UJ – firmware needs 1AA01118 (2009/06)
- Samsung HD103UJ PCB repair
- Need pcb for Samsung HD753LJ
Solutions ofBF41-00206B PCB (Donor PCB)
- HD103SI Samsung PCB BF41-00206B
- HD103SJ Samsung PCB BF41-00206B
- HD103UI Samsung PCB BF41-00206B
- HD103UJ Samsung PCB BF41-00206B
- HD154UI Samsung PCB BF41-00206B
- HD753LI/Y P/N: 474611CQ507089 Samsung 750GB
- Samsung HD103UJ/B P/N: 496831FS901711 F/W: 1AA01118 1TB
- HD103UI/JP1 P/N: 474612CQA13114 Samsung 1TB
- Samsung HD103UI 1TB SATA F1_3D P/N: HD103UI/Y
- Samsung HE103UJ SPINPOINT 1TB P/N: 469011CQ525233
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.
