We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs ofBF41-00354A PCB
- Seagate Momentus ST1000LM024 REV. A – 25 beeps, doesn’t spin
- ST1000LM025 conversion
- Samsung ST320LM001 Problems
- Samsung HN-M500XBB SATA Tx/Rx
- Make 2 Samsung M8E PCBs compatible
- Samsung HN-M101XBB USB
Solutions ofBF41-00354A PCB (Donor PCB)
- HN-M101MBB Samsung PCB BF41-00354A 00
- HN-M160MBB Samsung PCB BF41-00354A 00
- HN-M320MBB Samsung PCB BF41-00354A 00
- HN-M320XBB Samsung PCB BF41-00354A 00
- HN-M500MBB Samsung PCB BF41-00354A 00
- ST1000LM024, HN-M101MBB, 2BA30001, BF41-00354A, Samsung SATA 2.5 PCB
- ST1000LM024, HN-M101MBB/JP2, 2AR10001, BF41-00354A, Samsung SATA 2.5 PCB
- ST500LM012, HN-M500MBB/JP2, 2AR10001, BF41-00354A, Samsung SATA 2.5 PCB
- ST320LM001, HN-M320MBB, 2AR10001, BF41-00354A, Samsung SATA 2.5 PCB
- ST500LM012, HN-M500MBB/M1, 2AR20002, BF41-00354A, Samsung SATA 2.5 PCB
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.
