We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs ofBF41-00354B PCB
- Recovery from Samsung ST1000LM04 1TB
Solutions ofBF41-00354B PCB (Donor PCB)
- HM-M101BB/Z4 Samsung PCB BF41-00354B 01
- HN-M101BB/AV1 Samsung PCB BF41-00354B 01
- HN-M500MBB Samsung PCB BF41-00354B 01
- SAMSUNG PCB BF41-00354B
- ST1000LM024 Samsung PCB BF41-00354B 01
- ST1000LM024, HN-M101MBB/JP2, 2AR20003, BF41-00354B, Samsung SATA 2.5 PCB
- ST500LM012, HN-M500MBB/SC2, 2AR20003, BF41-00354B, Samsung SATA 2.5 PCB
- ST500LM012, HN-M500MBB/D, 2AR10002, BF41-00354B, Samsung SATA 2.5 PCB
- ST500LM012, HN-M500MBB/SS1, 2AR20002, BF41-00354B, Samsung SATA 2.5 PCB
- ST500LM012, HN-M500MBB/JP2, 2AR20003, BF41-00354B, Samsung SATA 2.5 PCB
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.
