We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs of2060-800041-003 PCB
- WD40NMZW-11GX6S1 SA modules failed but with ID
- WD My Passpord 4TB 2060-800041-003 doesn’t turn on
- WD USB PCB to SATA Adapters
- WD40NMZW-11GX6S1 failed to ID
- 2060-800041-003 compatible sata pcb
- SpyGlass and slow-responding type fault
- WD40NMZW-11GX6S1 PCB to SATA
- WD40NMZW-11GX6S1 PCB SATA Compatible?
- 2060-800041-003 REV P1 SATA compatibility
- Is there a compatible SATA PCB for 2060-800041-003? WD40NMZW
Solutions of2060-800041-003 PCB (Donor PCB)
- WD PCB 2060-800041-003
- WD30NMZW-11GX6S1 WD PCB 2060-800041-003
- WD30NMZW-59GX6S1 WD PCB 2060-800041-003
- WD40NMZW-11GX6S1 WD PCB 2060-800041-003
- WD40NMZW-59GX6S1 WD PCB 2060-800041-003
- WD40NDZW-11MR8S1 USB 3.0 WX72D Western Digital 4TB USB 2.5" Hard Drive
- PCB WD30NMZW-11GX6S1 Western Digital 800041-E03 AB
- WD40NMZW-59GX6S1 USB 3.0 WX11D Western Digital 4TB
- WD40NDZW-11MR8S1 USB 3.0 WX71D Western Digital 4TB USB 2.5" Hard Drive
- WD40NDZW-11MR8S1 USB 3.0 WX21D Western Digital 4TB USB Hard Drive
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.
