Case:After data recovery engineer testing, the aging of the magnetic head causes deformation and cannot locate repeatedly knocking on the wall.Open the market in the data recovery cleaning room, and use professional equipment to adjust the positioning after replacing the magnetic head.Mention data success. Solution:Do not repeat the power after the hard disk is powered…
Case:A client’s Samsung 80GB mobile hard disk cannot be used after collision during use. Solution:After opening the market, I found that the magnetic header was positioned. After the dust -free workbench made a magnetic correction, it was recognized. After the test, there were a lot of bad sectors. So a copy was made, and 70%of…
After switching master/slave roles, the drives still will not work together… what else can can be done?
At this point, it is recommended that the user separate the hard drives and connect them individually to the different interface ports of the system. If the system does NOT have a Secondary IDE interface, it is recommended that the user install an Ultra ATA PCI Adapter card. By doing this, each drive would then be able to individually communicate with the system. Ultra ATA PCI cards benefit your system by adding support for large capacity drives and enhanced support for data transfer rates by Ultra ATA devices.
I’ve seen programs in the past that were able to check the SMART status of a hard disk drive but it wasn’t easy for me to find. Also, I think I had to boot into the CD in order to check on it. What is your preferred method for getting this data to hopefully preempt…
Case:The customer’s HP server, 4 1TB SAS hard disk 2003 system RAID5, because the 0 and No. 1 disk turned on the red light, the array was dropped. Solution:The engineer used a dedicated equipment and tools to detect it. It was found that No. 0 hard disk was damaged by magnetic head. The opening data…
I have noticed for a few months that my mouse will randomly jerk across the screen. I’m super paranoid about security. But this is just silly! Has anyone else experienced this, and found out what causes it? It happens to me every couple of days. The cursor will jump across the screen about 1000+ pixels….
Case:Company X’s hard disk turned on the computer to hear the sound of the hard disk.Listening to friends said that the hard disk has not been recovered, but the data in the customer’s hard disk is very important. Seeing professional data recovery companies on the Internet-data recovery, calling our company’s 24-hour service hotline: 4006-759388 Consultation…
Case:The customer’s Western Digital 500G mobile hard disk suddenly found that it was unable to recognize. Solution:The engineer was damaged by testing and judging.After the opening of the dust -free room, the magnetic head was replaced, and the data was still unable to restore the data.For this hard disk, our company’s engineer has determined that…
Case:The customer said that the U disk was used normally the day before yesterday, and some data were copied to the U disk.When I opened the U disk partition on the computer the next day, I found that all the data in the U disk are all garbled. It is strange that it should be…
HDD Printed circuit board (PCB) with board number 2060-701384-002 is usually used on these Western Digital hard disk drives: WD1600ADFD-75NLR1, DCM HBCA2AB, Western Digital 160GB SATA 3.5 Hard Drive; WD1500AHFD-00RAR1, DCM , Western Digital 150GB SATA 3.5 Hard Drive; WD740ADFD-00NLR5, DCM HBCA2AB, Western Digital 74GB SATA 3.5 Hard Drive; WD1500ADFD-00NLR0, DCM HBCA2AB, Western Digital 150GB…
