Case:The U disk partition accidentally formats it. After the formatting, it does not store data to the U disk Solution:Data recovery engineers use professional devices to perform mirror operations on the U disk (the bottom layer code of the mirror U disk prevents the U disk operation during the recovery process and destroys the difficulty…
Case:The client server is: HP LH6000 server, a hard disk of 36G, a total of 5, the RAID5 for doing. During self -examination, the 3 and No. 4 hard disks report an error, bright red light, and after testing, these two hard disks are all bad sectors.The operating system is: Windows Server 2000 database: Oracle…
Case:After GHOST, the entire disk is formatted into a partition, or it is automatically formatted to 3 to 4 partitions. After these situations occur, the user does not need to worry. As long as the Ghost computer does not copy other data to the hard disk, the success rate can reach 100%.The restored data directory…
Case:Data recovery failure: The U disk connection computer is not reflected. Customers can not recognize the failure of multiple computer failures. Solution:Failure brief description: Driving chip damage data recovery process: batch the same model of the driver film, the data is successfully recovered
HDD Printed circuit board (PCB) with board number 2060-771829-004 is usually used on these Western Digital hard disk drives: WD10EZEX-08M2NA0, DCM EANNHT2MHB, Western Digital 1TB SATA 3.5 Hard Drive; WD1003FZEX-00MK2A0, DCM DANNKT2MG, Western Digital 1TB SATA 3.5 Hard Drive; WD5000AZLX-00CL5A0, DCM EHRNNT2MHB, Western Digital 500GB SATA 3.5 Hard Drive; WD10EZEX-00BN5A0, DCM EHRNHT2CG, Western Digital 1TB…
We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB. Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same! FAQs of 100664987 PCB…
Case:Miss Pan’s computer was crashing. If she couldn’t move, Miss Pan forced power to remove the power.After starting again, it was found that the data inside was gone. Solution:I checked the data recovery center on the Internet, and telephone consultation. Because there was something that could not send the hard disk over, the engineer came…
HDD Printed circuit board (PCB) with board number 2060-771630-000 is usually used on these Western Digital hard disk drives: The 2060-771630-000 Western Digital PCB repair process can usually be divided into 2 steps: find a replacement PCB and firmware transfer. 2060-771630-000 Western Digital PCB: Board Number Finding a donor Western Digital PCB board is easy,…
Case:WD10TMVW-11ZSMS1 WD1TB mobile hard disk 3.0 interface, running for normal operation, but cannot be recognized Solution:After receiving the customer’s plate, removing the box is a hard disk of WD Western data. The self -inspection sound of the hard disk during detection is normal. It can be ready under the PC3K disk. We can conclude that…
Case:Data recovery center U disk repair was successful, and the main control chip and Flash chip were successfully replaced, and the software information was successfully written to help customers repair the data and recover economic losses for customers.The Customer Service Department of the Data Recovery Center received a call from the customer for help, saying…
