Case:Customers use a WD5000AVDS as a desktop to store important data from the disk storage. Under normal use, it suddenly fails, and the hard disk capacity cannot be recognized. Now the data in the hard disk must be restored. Solution:First use the PC3000 to detect the hard disk. It is found that the model that…
Case:The laptop maintenance peers took a Samsung hard disk HM320JI. The hard disk circuit board was damaged. After the circuit board was replaced, the disk was still not recognized. Now it is necessary to restore the data in the hard disk. Solution:This is Samsung’s new model.The circuit board cannot be recognized directly.The Samsung’s hard disk…
Case:The server cannot enter the system, and RAID information is wrong.Customer telephone consultations have been recovered by many data recovery companies.Finally, choose strength data recovery company.Customers immediately drive to the data recovery center.The engineer was checked and restored. Solution:The HP server data recovery engineer preliminarily inspected the RAID5 with four 300G SAS hard disks. Customers…
Hardisk Search & Stats
Very powerful freeware text-Search Engine for your harddisk. It enables you to conveniently search large numbers of text/ascii-based files simultaneously.
Harddisk Search & Stats is ideal for those who are handling text files, such as programmers, web developers, computer professionals, system managers and other demanding users.
HDD Printed circuit board (PCB) with board number 100533173 is usually used on these Seagate hard disk drives: ST32000540AS, 9WM, TK, PN 9SY158-568, FW CC83, Seagate 2TB SATA 3.5 Hard Drive The 100533173 Seagate PCB repair process can usually be divided into 2 steps: find a replacement PCB and firmware transfer. 100533173 Seagate PCB: Board…
AHCI (Advanced Host Controller Interface) is present on newer Intel chipsets. AHCI mode is enabled in the BIOS where 3 settings are commonly available: IDE, AHCI, and RAID. The last two (AHCI and RAID) require a floppy disk with the driver that can be introduced into the operating system installation through F6. Otherwise, the hard disks won’t be detected.
AHCI mode has 3 main advantages:
When it comes to performance, there really isn’t a big difference in using AHCI.
Note: If you installed Windows in IDE mode (which means that you didn’t use F6 and supply a driver disk), then simply changing the BIOS setting to AHCI mode and rebooting will cause Windows to fail and will require a repair install. Most people are advising to reinstall Windows if you want AHCI enabled. (More information on AHCI)
Case:Customers describe the hard disk cannot be recognized normally, and they can clearly hear the sound of “Da Da”” in the hard disk.According to the customer’s description
We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB. Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same! FAQs of 006-0A90561 PCB…
Case:Seagate Momentus 5400.6 500G mobile hard disk, the customer puts it in the pocket of the coat, accidentally accidentally, the hard disk fell from the pocket to the ground.Then connecting the computer, I did not recognize the disk, and there was creaking abnormal noise. There were important job information in it to recover data. Customers…
Maxtor DiamondMax Plus 9 PCB Circuit Boards Swap/Replacement for Data Recovery Needs.
Hello! Do you have a PCB in stock that will work with my specifications?
MAXTOR DIAMONDMAX 9 120GB
Code: YAR41BW0
Model: 6Y120P0-131211
Chip: Ardent C5-C1 040111500
An 8-pin chip is PRESENT at the opposite end of board from the connectors.
I believe this is the PCB board is the one that I need but I can’t locate
“motor combo #”. Maxtor 040111300 DiamondMax Plus 9 PCB
Maxtor ARDENT C8-C1 040111300 DiamondMax Plus 9 PCB
Main Controller IC: ARDENT C8-C1 040111300
HDD Motor Combo IC: L7250E 1.2
I have a Maxtor 0401115000 DiamondMax Plus 9, my question is that you have has a HDD Motor Combo IC: L7250E 1.2, On my drive it
is L7250E 1.0, Are they compatible, and will they interchange? I do know
that this would be my gamble but I would like to know as much as possible
before putting out the money. Thank you, Clyde.
Im trying to get a replacement board for my Maxtor DiamondMax Plus 9 – 80 Gb
The closest I can find is;
Maxtor Ardent C5-C1 040111500 DiamondMax Plus 9 PCB
Main Controller IC: Ardent C5-C1 040111500
HDD Motor Combo IC: L7250E 1.2
Everything else matches but the HDD Motor Combo IC on mine is;
HDD Motor Combo IC: L7250E 1.0
Will this make a difference or will I still be able to use the board
available from you to retrieve the data on this disk?
Many thanks
Order Maxtor DiamondMax Plus 9 PCB on HDDZone.com with worldwide free shipping.
