Seagate Barracuda 7200.7 Hard Drive PCB

Buy Seagate Barracuda 7200.8 hard drive PCB(Printed Circuit Board) on HDDZone.com with low price, fast shipping and top-rated customer service! All kinds of Seagate Barracuda 7200.8 HDD PCB for your Data Recovery Needs!

Seagate Barracuda 7 PCB ST3160023AS 100328754
Name: ST3160023AS
Main Controller IC: 100328754
HDD Motor Combo IC: SH6950D
Seagate Barracuda 7 PCB ST3160023AS 100367025
Name: ST3160023AS
Main Controller IC: 100367025
HDD Motor Combo IC: SH6950D
Seagate Barracuda 7 PCB 100274360
Main Controller IC: 100274360
HDD Motor Combo IC: SH6950D/100244097
Seagate Barracuda 7 PCB 100277704 100252820
Board Number: 100277704
Main Controller IC: 100252820
Motor Combo IC: 100244097
Seagate Barracuda 7 PCB 100291893 REV A
Board Number: 100291893 REV A
Main Controller IC: 100319396
HDD Motor Combo IC: 100244097
Seagate Barracuda 7 PCB 100328755
Main Controller IC: 100328755
HDD Motor Combo IC: SH6950D
Seagate Barracuda 7 PCB 4490D6/100274360-74
Main Controller IC: 4490D6/100274360-74
HDD Motor Combo IC: 100244097
Seagate Barracuda 7 PCB 4490D6/100274360-74/100300639-83
Main Controller IC: 4490D6/100274360-74/100300639-83 HDD Motor Combo IC: SH6950D
Seagate Barracuda 7 PCB L4490D8/100342861-74
Main Controller IC: L4490D8/100342861-74
HDD Motor Combo IC: SH6950D/100343137
Seagate Barracuda 7 PCB ST3160023AS 100336321 REV A
Board Number: 100336321 REV A
Main Controller IC: 100328756
HDD Motor Combo IC: SH6950D
Seagate Barracuda 7 PCB ST3160023AS 100367024
Name: ST3160023AS
Main Controller IC: 100367024
HDD Motor Combo IC: SH6950D

Note: Hard drive failures are NOT always caused by circuit board failure. In most cases, you should exchange the BIOS chip before you swap the PCB. You should have certain technique.

Read More

How to low-level format a Mac hard drive using Drive Setup?

Low-Level format Mac Hard Drive To low-level format a hard drive using Drive Setup, follow these steps:

  1. Start by selecting the hard drive you wish to low-level format.
  2. Under the Function menu select Initialization Options
  3. Select Low Level Format (a check mark will appear) and click OK.
  4. Click Initialize at the bottom of the main screen.
  5. Again click Initialize.

Drive Setup will low-level format the drive and prepare it for use with the Mac OS, after which it can be loaded with software.

Note:

  • Low-level formatting a hard drive will destroy all data on the drive and destroy any chance of data recovery. We suggest you make a reliable back up of all data before attempting this.
  • Canceling a low-level format of a SCSI hard drive before it has completed can render the drive permanently inoperable.
  • Low-level formatting can take several hours depending on the drive.
Read More

2060-701640-007 WD PCB Circuit Board

HDD Printed circuit board (PCB) with board number 2060-701640-007 is usually used on these Western Digital hard disk drives: WD10EARS-22Y5B1, DCM HBRNHT2MGB, Western Digital 1TB SATA 3.5 Hard Drive; WD1002FAEX-00Z3A0, DCM EARNHTJCA, Western Digital 1TB SATA 3.5 Hard Drive; WD10EARS-22Y5B1, DCM HANNHT2MAB, Western Digital 1TB SATA 3.5 Hard Drive; WD20EARS-00J2GB0, DCM HARNHT2ABB, Western Digital 2TB…

Read More

The virtual machine RHEL5 server was accidentally deleted and recovered successfully

Case:When the machine room managers of this school cleaned and stored, they mistakenly deleted an important virtual machine to the virtual machine of the teaching affairs system. The virtual machine operating system was RHEL5 and the size of the virtual machine was 1T.Essence Solution:The engineer analyzed that the data was quite good. The VMware ESX…

Read More