We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB. Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same! FAQs of 2060-701477-001 PCB…
HDD Printed circuit board (PCB) with board number BF41-00206B is usually used on these Samsung hard disk drives: HD103UJ, HD103UJ/D, FW 1AA01117, Samsung 1TB SATA 3.5 Hard Drive; STSHD753LJ, HD753LJ, FW 1AA01118, Seagate 750GB SATA 3.5 Hard Drive; HD103UI, HD103UI, FW 1AA01111, Samsung 1TB SATA 3.5 Hard Drive; HD103SI, HD103SI, FW 1AG01118, Samsung 1TB SATA…
I have installed virtual box But when I tried to run it. It shows me an error as: I have been trying everything for whole day. Like there are answers related to this question as: VT-x is not available, but is enabled in BIOSVT-x is not available (VERR_VMX_NO_VMX) (VirtualBox) but enabled in bios, hyper-v enabled,…
I have an external HDD which I would like to “safely remove”. Unfortunately, my system (Windows 7 x64) complains that “the device is currently in use”. Using Process Explorer I discovered which process is holding a handle on the device: Obviously, System is not a process that I can just kill and be done with…
HDD Printed circuit board (PCB) with board number BF41-00095A is usually used on these Samsung hard disk drives: HD160JJ/P, HD160JJ/P, FW 100-51, P/V SFN, Samsung 160GB SATA 3.5 Hard Drive; HD160JJ/P, HD160JJ/D, FW ZM100-34, P80SDT, Samsung 160GB SATA 3.5 Hard Drive; HD080HJ, HD080HJ, FW 100-33, P/V MS, Samsung 80GB SATA 3.5 Hard Drive; HD160JJ, HD160JJ/OMD,…
Case:A client was raining a few days ago, and the customer’s hard disk was placed in front of the window sill.Without paying attention, the rain drifted in and wet the hard disk.After that, it could not be online during operation. Solution:By asking more data recovery companies, I believe that the data recovery center is very…
Case:Due to the operational error of the customer, the operating system was installed by the computer by mistake. At this time, the customer had to restore some CR2 files. Solution:This failure is not a big problem from the surface phenomenon. The key is that the user uses the special file format of CR2. Most of…
Case:Mr. Zhu’s hard disk reads very slowly, and the data is lost. Solution:After inspection by the engineer, it was found that there were a lot of bad sectors. For safety, it was decided to make a full -mirror image for the hard disk, and then restored the data in the mirror disk.
Case:Failure phenomenon: Don’t recognize the plate, there is a click -clicking sound. Customers take measures: I still can’t recognize the plate after powering several times, and then send the data recovery center directly Solution:IC25N020ATMR04-0, Failure Phenomenon: Do not recognize the disk, after receiving a clicked sound, the magnetic head of the hard disk has been…
Method for Reading/Writing serial flash ROM on Western Digital PCB Logic Boards… Tested on:
2060-001159-006 REV A
2060-701292-000 REV A
2060-001293-001 REV A
2060-701335-005 REV A
Note: Method not work with “Mammoth” boards.
WD Scorpio PSV Mode:
