2009 | DataRecoveryUnion.com

Internal Error 2

Articles / 2009-08-20

Maxtor Manager program is showing Internal Error 2 and a red “M” icon indicating backup failure when to backup OneTouch III drive. What is wrong? This error generally appears in the OneTouch III Maxtor Backup log in the different Windows operating systems. …

Internal Error 2 Read More »

Computer crashes when an ATA drive larger than 32 GB is installed

Articles / 2009-08-19

If your computer crashes once an ATA drive larger than 32GB is installed, it is probable that the capacity of the hard drive is too large for the BIOS to support. This article and its troubleshooting refer only to ATA drives, as Serial ATA controllers do not have any issues seeing large capacity SATA drives.…

Computer crashes when an ATA drive larger than 32 GB is installed Read More »

Locate CHS values for older Seagate, Maxtor, or Quantum ATA drive?

Articles / 2009-08-19

What are the Cylinder, Head and Sector values [C/H/S] for ATA disk drive and how to find them? C/H/S is an older method of identifying drive capacity and tracking the location of data on the drive. The C/H/S method was replaced with the Logical Block Addressing (LBA) when drives transitioned above 8.4 GBytes.…

Locate CHS values for older Seagate, Maxtor, or Quantum ATA drive? Read More »

Back up folders not listed in ‘Folders Recommended for Backup’ window?

Articles / 2009-08-19

On the Backup and Restore screen in the Mirra application,Click New backup on the Backup Tasks menu. Select a folder to back up from the Browse for folder window and click OK. Click OK in the Confirm Backup Creation window.…

Back up folders not listed in ‘Folders Recommended for Backup’ window? Read More »

APPLE PowerBook doesn’t recognize 1394 storage

Articles / 2009-08-19

My Apple PowerBook laptop suddenly stopped responding. The system freezes. When restarted, it does not recognize any FireWire devices. Download and install the latest firewire drivers from the Apple Software Updates Web site: http://www.apple.com/swupdates. Try these troubleshooting tips as well:If a PowerBook computer with a Maxtor 1394 CardBus adapter will not start up, eject the card.…

APPLE PowerBook doesn’t recognize 1394 storage Read More »

How to Perform a Software Update on Your Maxtor Fusion

Articles / 2009-08-19

The following procedure shows you how to perform a software update on your Maxtor Fusion. During the update process, the Maxtor Fusion will be unavailable to active users. Please notify these users before proceeding.Download the FUSION-x.xx.pkg (where “x” equals the numbers for the update) file to your supported, Windows or Macintosh Client computer.…

How to Perform a Software Update on Your Maxtor Fusion Read More »

Global Access File Size Limitations

Articles / 2009-08-19

This article provides comprehensive information about the file size limitation of the Global Access service. The Global Access service limits file size to approximately 2.0 Gigabytes when uploading or downloading files to your Central Axis over the internet. This built in file size limitation is in consideration of fairness to the rest of the users in the Global Access community.…

Global Access File Size Limitations Read More »

Format a hard drive without using FDisk

Articles / 2009-08-19

STEP ONE You first need to decide what operating system you intend to load after formatting the hard drive. It is best and easiest to use a boot disk for that Operating System, such as MS Dos6.2 or Windows95b or Windows98SE.…

Format a hard drive without using FDisk Read More »

How to use FDISK to partition a Hard Drive?

Articles / 2009-08-19

Using FDISK to create a Primary Partition 1. Go to an MS-DOS prompt or use a Boot Floppy. 2. Enter -> fdisk 3. Answer the question for large disk support (Y=FAT32 N=FAT) 4. If option 5 exist then you have more than 1 drive attached to your system.…

How to use FDISK to partition a Hard Drive? Read More »

Can’t partition a SCSI hard drive with FDISK or Disk Utility?

Articles / 2009-08-19

If you are experiencing difficulty creating a partition on a SCSI disk drive, try these basic troubleshooting steps.Check all cable connections. Test data cable by trying a different cable or try the cable on a known working drive. Check the jumper settings.…

Can’t partition a SCSI hard drive with FDISK or Disk Utility? Read More »