Case:The hard disk can be identified, one of the partition data can be seen but cannot be copied, and the other two partitions are formatted Solution:After the inspection of the engineer, there are a lot of bad sectors in the hard disk. Through the dedicated bad tract mirror program, 95%of the data has been successfully…
Case:The original storage architecture of the customer is a dynamic cross -zone volume made by 7 LUN (each LUN2TB). The file system is a NTFS partition with 7 LUN capacity.Due to the needs of data storage, customers are dynamically expanding the existing file system. The original plans to add two 2TB LUNs. During the expansion…
Case:When Mr. Yu took the HP Probook 4413S laptop to play games, he accidentally pressed the one -click restoration button on the notebook, and the hard disk was restored to the factory state. The original D, E and F disks were all lost.There is also important information in the hard disk, so I found the…
Possible Duplicate: How do I fork a process that doesn't die when shell exits? Sometimes I remotely connect to my Ubuntu using NX. I then run some jobs in the background, e.g.: $ /path/to/script.pl & However, when I log out, the jobs stop running. How can I make them continue even after I…
We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to swap the “BIOS CHIP” with your original PCB. Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same! FAQs of 2060-701383-001 PCB…
Case:Server model: HP DL380G7 failure description: The server cannot enter the system, raid information is wrong. Solution:The HP server data recovery engineer preliminarily inspected the RAID5 with four 300G SAS hard disks. Customers did not replace the bright red light hard disk in a normal use and caused the array to collapse.There is no physical…
I am trying to copy files to my external hard drive using PartedMagic. My computer won’t boot, so we are sending it in to get repaired. I’ve tried EVERYTHING but can’t get it to boot into any desktop or recovery environment. What I am able to do is boot to a PartedMagic command line (Using…
I had removed the Libraries from my Windows 7 with this registry tweaks, but since the update to Windows 8 the Libraries are back in my Windows Explorer. So I tried to tweak the registry again, but it fails to get permission to change the value (in Windows 7 it worked). http://www.askvg.com/how-to-remove-libraries-from-windows-7-explorers-navigation-pane/ Someone know how…
Case:Dell server SAS hard disk ST3146855SS, cannot enter the system after a restart, the hard disk cannot be recognized, so carry the hard disk to the data recovery center Solution:The hard disk is the Dell server SAS hard disk, the Seagate ST3146855SS, after the engineer’s power generation test, the hard disk rotation is normal, the…
Case:The client server is an HP server, which has 3 73G hard disks, the interface is SCSI, and the array level: RAID5 operating system is: Winows Server 2003 database: SQL Server 2000, Kingdee Software Database failure: The server RAID card is damaged, the data cannot read the data cannot be read. Solution:The engineer dedicated mirror…
