Case:
The customer suddenly used the blue screen during the normal use of the customer, and the restart could not enter the system, so it was restored to one of the disks.
Solution:
There are only two arrays composed of two plates 1, RAID0 2, RAID1. After receiving the disc, analysis of the array parameters of Raid0, RAID0 required for RAID0 are as follows: 1. Block size 2. The sequence of the disk is two sets of two sets. Well, you know that you only need to get the size of the block, and the sequence can be combined arbitrarily. Processing process: The special feature of this case is that the partition table of one of the plates is rebuilt. If the number 1 in the array is rebuilt, the analysis will not have any impact on the analysis (note the “in the array”” here). If It is the result of incorrect analysis that may produce incorrect analysis results in the array. After comparison
