Case:
Failure phenomenon: The hard disk can be recognized but cannot start the system.Notifying the network management inspection found that the hard disk fault was a physical failure.Customers take measures: Customers are still unable to restart the computer repeatedly and have found data to restore maintenance companies for maintenance.But it did not succeed.Finally send it to the data recovery center.
Solution:
After arriving at the client, I carefully asked all the reasons. I have been repaired elsewhere, and it will definitely not work well. First of all, test what the hard disk is now. When the project was opened, it was found that the hard disk surface was verified by the damage point. Disk single -headed disc servant. Data recovery costs are too high. Check the servo area without scratching through third -party technical means. Data can be restored. Simply communicate with customers. Customer data is the company’s personnel file for several years. Regardless of cost recovery. The company purchases hard disk accessories by urgently. In the early stage, 12 fast hard disks are opened to read the data. Three working days of overtime treatment. Successfully restore the complete data required by customers. Data recovery 24-hour service hotline: 4006-759388 Friendly Reminder: If the file is lost by mistake, do not store any data in the hard disk, do not do any operation on the hard disk, do not format the partition The data of the data cannot be recovered in the secondary damage; if the hard disk is a hardware failure, the hard disk has been damaged or fell, do not power the hard disk, do not turn on the computer, do not connect to the computer, do not try to repair the disk, otherwise the deformation or damaged magnetic head will be It will be very likely to scratch the plate, causing the data to be completely unable to restore. Data recovery needs to send professional data recovery company testing and recovery.
