We first look at the following two pictures. Picture 1 is the “BIOS CHIP” of the circuit board. When we replace the PCB, we need to replace the “BIOS CHIP” with your original PCB.
Picture 2 shows the “Board Number” of the board, and the “Board Number” must be the same!
FAQs ofBF41-00303A PCB
- Samsung HD103sj not spinning or making any noise.
- Samsung BF41-00303A PCB Needed
Solutions ofBF41-00303A PCB (Donor PCB)
- HD103SJ Samsung PCB BF41-00303A 00
- HD105SI Samsung PCB BF41-00303A
- HD754JJ Samsung PCB BF41-00303A
- HE103SJ Samsung PCB BF41-00303A
- SAMSUNG PCB BF41-00303A
- PCB HD103SJ Samsung BF41-00303A 00 PELZE19D10784
- PCB HD103SJ Samsung BF41-00303A 00 PELZEAG8D12192
- PCB HD103SJ Samsung BF41-00303A 00 PELZECE7N11139
- PCB HD103SJ Samsung BF41-00303A 00 PELZEB46D10792
- PCB HD105SI Samsung BF41-00303A 00 PAWZF4FAB17324
Note: When repairing a hard disk with a damaged circuit board, we must first ensure that the damage of the hard disk is caused by a circuit board failure. Usually it is relatively simple to replace the circuit board. The tools we need are heat guns, tweezers, etc., you can also find a local repair shop to help you complete this work.
